Short: More Boardinfos for Sysinfo Author: Holger.Hippenstiel AT gmx.de Uploader: Holger Hippenstiel nc-online de Type: util/moni Version: 3.7 Replaces: util/moni/SysinfoBoards.lha Requires: util/moni/SysInfo.lha Architecture: m68k-amigaos; generic Distribution: Aminet Kurz: Mehr Boardinfos fuer Sysinfo SysinfoBoards V3.7 ================== TL;DR Copy Sysinfo.boards to S: Sysinfo will recognize more expansion boards. ***************************************************************************** *** Important *** You must increase the Stacksize of SysInfo, or else it will crash with these extended Boardinfos !I didn't notice because i got StackAttack running -> http://aminet.net/package/util/boot/StackAttack2 I've included an new Icon with 16384 Bytes Stack which seems enough even without StackAttack. Or increase the StackSize yourself. Or install StackAttack on your System - it's a good tool. :) ***************************************************************************** This is a list of all known expansion boards for the amiga, i've added a lot over the time and thought it maybe useful for others, if you know some which arent in the list, write me a mail and i will add them. Update 3.5: Added 50 new ID's with thanks to infos from http://amiga.resource.cx Reworked a lot of the descriptions. Please understand that many times the companies reused ID's, for example Manufacturer 2017 / ID 11 = http://amiga.resource.cx/search.pl?mid=2017&base=dec&pid=11 Lists 11 expansions with this ID. Ok, if they got the same functionality like SCSI port on all of them it would make sense, but manufacturers used the same ID for totally different hardware, so the description will be sum of them - in this case SeriesII/SCSI - but they also did an IOExtender and PhonePak (an Fax-Card) with the same Autoconfig-IDs .. :-/ I'm not really sure why this reusing happend so often, but there is nothing i can do about it. Multiple entries with same ID wont work, Sysinfo will just pick the first one. ***************************************************************************** Many thanks to Robert Miranda fmr. GVP Tech Support for some interessing Knowledge about multiple ID's regarding the Manufacturer 2017 & ID 11: "The values you see in the board ID field is all the GVP DPRC chip. It's the same on any board with that IC. That's why a Series II HC, a HD8/HC8, the TBC+, all Combo030 and G-Force 030/040 accelerators, I/O Extender, and more report this. A new chip production run would have been needed to change the board ID for each change. The chip was actually designed with only the HC8/HD8 in mind, but a common Amiga to PC glue chip (vs many PAL/GAL, 74-series gates, and bus buffer chips) was an incredible cost saver back then, and ideas flowed into new products.." I guess the same thing happend at Phase5 and others with multiple products for the same ID. He also proposed i dig into the GVPInfo tool, disassemble it and have a look how the tool reads some extended information in the board config area .. I did, but thats not useful, because it basicly contains an own version of http://aminet.net/package/util/libs/BoardsLib - which will maybe used by Sysinfo in the future. It's no problem if an Manufacturer/ProductID occurs multiple times, in case of 2017/11 you get gvpscsi.device and gvpscsi2.device and so on .. ***************************************************************************** If an Manfacturer+ID is already in the list, there is no need to write me alternativ descriptions for it, thanks for trying. :) Update 3.6: It needs atleast Sysinfo V3.22, V3.24 (I know the readme says 3.23 ..) from http://aminet.net/package/misc/fish/fish-0969 would work. Added & corrected some entries, the next SysInfo will include this list, so there will probably no further updates to this list. Get the newest SysInfo here -> http://aminet.net/package/util/moni/SysInfo BTW: Check out the ZZ9000 which was also added in this release, what a incredible new Amiga expansion - Wow ! Based on a powerful Xilinx 7-series FPGA and 2 ARM Cortex-A9 cores: RTG (P96 compatible) up to 1920x1080 at 8bit/16bit/32bit. (1920x1080@16 Bit) Scandoubler with interlace flicker-fixer with AGA support Dual 666MHz ARM Cortex A9 coprocessors to offload JPEG, MP3, GPU-acceleration 1GB DDR3 RAM Gigabit Ethernet interface with SANA-II support, get your Amiga online USB port supports USB mass storage devices. Access USB sticks from workbench. SD Card interface (for firmware updates, not usable from AmigaOS) For Amiga 500, 2000, 3000 and 4000 (Zorro 2 and 3 compatible) Drivers, firmware & schematics are open sourced: https://source.mntmn.com/MNT Includes ZZ9000CX video slot capture card with cable. SDK with C examples for running ARM code from AmigaOS. https://shop.mntmn.com/products/zz9000-for-amiga-preorder Update 3.7: Seems the new Sysinfo is a bit delayed, so here is an update with some more boards added. Check out my other tools: http://aminet.net/search?readme=%22Holger+Hippenstiel%22&sort=date&ord=DESC DISCLAIMER This software is subject to the "Standard Amiga FD-Software Copyright Note". It is Giftware as defined in paragraph 4g. If you like it and use it regulary, please send me a small gift. For more information please read "AFD-COPYRIGHT". Diese Software unterliegt der "Standard Amiga FD-Software Copyright Note". Sie ist Giftware wie definiert in Absatz 4g. Falls du sie magst und regelmaessig benutzt, sende bitte ein kleines Geschenk. Fuer mehr Informationen lies bitte "AFD-COPYRIGHT". (/pub/aminet/docs/misc/AFD-FilesV-XX.lha V=Version,XX=Languages) AUTHOR Please send comments, bug-reports or small gifts like a Vampire V4 or a now "worthless :P" NVidia RTX 2080 Ti, or Paypal me to: Holger.Hippenstiel AT gmx.de Hauptstr. 38 71229 Leonberg Germany